Not the original radio, bracket with 4 screws. Wiring adaptors available at most of the places you listed. Check out installdr.com...
It's a Toyota !!! It could not be any easier. Try it, be easy and it will be a simple job. You do have your wiring harness adaptor already dont...
Radio Shack has all different sizes that have a cover they are easy to drill and work with they have metal ones but I suggest plastic.
Use whats called a "Binding Post" (Radio Shack) in place of the screws and a plastic box in place of the 2 X 4 and you got a pretty good idea. The...
Do you have a voltmeter ?? 12.8-13.5 volts output with load (blower fan, lights,flashers on) Any large current demand would have to come from...
TSB SU 004-00 Addition of plate washers TSB Do any of the Toyota technicians know the reason for the addition of the "plate washers" part #...
I checked my 00 manual and it said the 14 pin plug is for Canada models the pin that matches pin 23 on the US market cars is PIN 2 it is listed as a...
-0- <--- This is the best explanation that I can provide, The 0 is the pin on the seat and the dashes are the clips on the body ( both X2), You...
You have to remove the lower seat cushion, I tried it on my 00 and I could not get it out !! The method USED to be push down on the front edge...
I would stick with OEM on these. I change mine at 70k miles for fear they would sieze in place. CW
A volt meter would be the best check 13.5-14.0 at battery terminals with lights and blower fan on is normal for alternator output. If that is the...
There should be a rubber drain plug that you can take out to drain. Could be the seals around tail lights or back glass. Fold down the seats...
No problem !! If anyone needs info on 98-02 models just PM me and I will try to get it to you. I have a 98-02 parts list with OEM part #s I...
Count me O-U-T People never learn, With the $$ of those things and the $$ of gas those things are going to be extinct SOON !!
Yes
I have had great luck with all Pioneers that I have owned ( about 6 or so ) I have heard that the install in the 03+ can be a little tricky with...
I have seen plugs at the auto parts store they may have ones that will fit ?? Some were in the help parts section and some with the ricer stuff for...
WAL*MART saves a few $$ off of singles in a 2 pack. I dont know if you will find H-4 (In Silverstar)I think the sub is 9003 I will check. CW
I looked in the 00 Corolla manual and it shows a tensioner that must be pushed in and then released it appears to be a self adjuster that would move...
Advice on leather steering wheel cover options The steering wheel (standard gray) on my 00 Corolla has begun to separate from the inner metal frame...
Separate names with a comma.