The only thing that I can offer is that Nissan engines and the Maxima had known problems with the timing chain tensioners (noisy at first and $$ to...
At that rate you may not see anything, Just keep a close eye on it and top off. May run forever. I think most Toyotas burn some oil. CW
Check the polarity to make sure they are not "out of phase" You could also run some heavier gauge speaker wire back to them that will help...
I would check the connectors at the grid (clean and tighten) Unless you have a major area missing from defroster coating you can get the...
The click noise is the relay. Does the indicator come on to show it is on ?? (the yellow indicator) If it does, I would check for voltage at the...
100k where does it say that ?? It should last the life of the engine. The timing belts (some) are rated at 90K. I heard that there is a timing...
I gave away my perfectly maintained 190K miles Geo Prizm (base model) for only $400 ( 2 years ago) I hate buying or selling ANYTHING !! CW
I would use a relay then you have no worries ( ECU, + or - trigger, etc..) CW
The plug is located in the front,center, 2 pins. Not sure where the sensor would mount on an LE. You could try to put different amounts of resistance...
The light could be low fluid or a loose E-brake switch. OEM Toyota rotors are about $90 each. I need rotors as well at about 93k miles they...
I believe that to be the Mazda made engine that year ?? You should be able to get the specs at the library in the reference section. CW
If you are looking for green, I think you will be better off with OEM. The 3rd party ones are very dark and suck-up most of the light. As far as...
The PC supply is not a bad idea ( I use one ) I would try to find an older model ( one that had a manual power switch) If there is a short or...
For small work you need a 25-40 watt soldering iron. And you must work quickly to avoid damage.
Those cables that you have a link to are for the speakers (they would be handy though) You also need the adaptor harness for where the H-U will be...
Yes, Crutchfield to see what fits and get the harness adaptor so you dont need to cut the wires up front (as mentioned, only at speakers) If you add...
I also think this discussion is about 2 different rim sizes. 98-02 and 03+ The 98-02 steel and alloy are 14 X 5.5 The 03+ steel and alloy...
On the 98-02 parts list that I have it shows the tach and speedo as like separate modules maybe you can exchange the speedo section only with yours....
Craftsman !!!!
You may need an EZ-Out to remove it. Crasftsman makes a set for stripped heads, this is more of a broken bolt situation. CW
Separate names with a comma.
