My stuff arrived today and got a cool suprise They sent the variable wiper switch (in good shape !!) They also sent the headlight switch, The cruise...
Thanks for the help !! I was hoping it would be simple. I have been looking into this mod for a while. So you were able to go from no int wipers...
Changing wiper/washer switch on 00 Corolla Has anyone had any experience changing the wiper/washer switch on a 98-02 Corolla ? Thank You
Illumination = # 194 bulbs #168s are brighter.
Not on a 98-02 Corolla.
It is 2 sections, the seat back and seat bottom, The bottom has to come up first. In the areas of the seat bottom where a passenger would sit ( left...
If you don't have folding seat backs you can pull up the seat cushion up at each seating location (L&R), and it will expose the bolts used to...
There was an issue a while back about 2 lights that were swapped around (T-S & DEF?) afterwards, but I dont know what years they were doing the swap...
^^ if you are talking about the single bulb in the console shifter, the easiest access (which is not all that easy) is to remove the center console...
Hey Fox, I signed up at the library for 1-10-05 I will try to find the wiring for the fog lights and get it to you.
Antenna ?
The Toyota TSB shows 99/00 Corolla as pin #23 (same as Vamps DIY) shown as Ign lead. The yellow wire if it is pin #13 is shown the 00 wiring as...
I would stick with OEM plugs, and I would also not leave them in there that long. There are no plug wires on these models they have individual...
I have read all the wiring is in place for them already ??? If you plan on tapping into parking lamp circuit you will need a relay.
I had a set of OEM pads with original rotors and no disc brake quiet used upon install and they were noisy from day 1. I currently have new OEM...
Stranded is best (more flexible) You should also fuse all connections near voltage source and solder connections.
All different sizes used mostly 16-22 awg or so to save $$. Most LED setups dont draw very much current, (unless they are HUGE !)
By all means buy the wiring adaptors ! So nice to not have to cut any plugs off. The trim pulls straight out and reveals 4 screws for bracket. Front...
I would be very careful !!! If you were getting a single click with each attempt to start it was more than likely the starter contacts worn. And the...
The plunger is staying engaged, It will damage the flywheel. Starter replacement should do the trick just try to get a good one. Re-Mans can be...
Separate names with a comma.
