Hey LowRolla, are those black covers on the intake tubes stock ?? And also are you able to close the cover on that + battery terminal if so I...
I think you may have some loss with that type wire (due to AWG) When I first saw monster cables I thought what a joke but the extra large size of...
NOT THE BOTTOM NUTS ( I did the same thing) Pop off the plastic covers on top (back edges out and up to remove) That will expose the bolt to remove...
I think the LP may have it. It must be a problem with the 3rd party harness possibly a wiring mix-up. Can you get a hold of an ohm meter to check...
Nice spelling of Corolla as well. How about a dumb@$$ citation in return?? CW
If you pull the battery for a bit it will reset light. You dont mention year?, my 00 was a MAF sensor. CW
Most L E D s are any where from 1.5 to 3.1 volts they will handle a LITTLE more forward voltage but be careful. They will handle a reverse polarity...
Check out car-part.com CW
None of the bulbs have polarity, If you have a volt meter that would help to determine polarity for the LED wiring. And dont forget the flat side on...
Only info I have is on my 00 Corolla it only took a few seconds to change, you could check at the library reference section or check the auto parts...
Only tips I can think of are, 1) keep the soldering tip clean with a wire brush. 2) heat the wires first then then melt solder onto the hot...
Separate names with a comma.
