Unfortunately not, but E.L. Prototypes has one for $180... http://www.elprototypes.com/Corolla.htm
There was nothing wrong with your post, exolyte... Those TWM knobs look really cool for $10 less on the shifter/knob package, and are actually made...
It certainly is normal... More fuel is used during warmup as engine is operating on a richer fuel mixture and idling at higher rpm. Engine oil/tranny...
I switched to Amsoil's Long Life Synthetic 75W-90 Gear Lube at 3600 Kms and felt a great improvement, especially down to -50*F......
It looks good, and installs only where you really want it; down near the firewall behind the brake fluid container, unlike my 2004 Vibrant strut bar,...
On a Honda S2000, dyno tests showed a jump from 198 to 209 WHP with a CAI and TB coolant bypass, then still made 207 WHP when reinstalling stock...
Shaving 10 thou off the head will raise compression about 1/4 point and add about 5 HP, but you don't want to if you're going with the TRD blower...
The TWM shifter's lower extension is 0.4" longer than stock to reduce throw, and is 3.5" shorter than stock...A bit low for my height...
The IAT sensor is part of the MAF sensor and is used for detecting ambient temperature on a cold start, and intake air temperature as the engine...
LOL! Yeah, all the extra torque shoves you back so hard that it is now much harder to overcome the awesome resistance generated by the throttle...
I have Injen's CAI on my 2003 Corolla (part #RD2081). They also have a SRI for the 2001-2002 (part # IS2080). It is of very high quality and works...
The non-VVTi versions were only LEV rated. Valve overlap was used before our variable valve timing technology. The 1ZZ-FE VVTi's exhaust valves...
Is it an AEM CAI?
Exhaust-gas recirculation is achieved by internal recirculation via appropriate valve overlap... The VVT-i system can change the intake cam timing...
Interesting... The AEM's MAF sensor mount is a bit closer to the TB, and also on the back side instead of nearly on top, compared to my Injen...
Is the car sitting on a perfectly flat and even floor? What if you check with car turned around? Make sure your tire presures are equal...
I don't like the look of the actual VW GTI... For that price, I'd get a Celica GTS, now in its last year... If you can wait till next fall, the new...
What's your car's total mileage? It does go down a bit initially, then stabilizes till next oil change. Always try keeping it at full mark for best...
oxymoron is correct... 28 psi should be about right for 215/60-16's.
I don't believe a lean condition could even cause such pinging. The KS is bolted up high in the back of the head, close to the TB... According to...
Separate names with a comma.
