Coilover help

The 7/5 kg spring rates are factory setting and still aren't stiff enough to prevent the driver's side from sagging due to the transmission weight + driver weight. There's nothing you can do except raise the driver's side half an inch to compensate or order stiffer spring rates. No worries though. I had go through the same thing corner balancing my car when I installed my coilovers as well.

No problem. Just to let you know, you might have to adjust the height several times while the springs are still settling. The trick is to just drive on them how they are for a month and then readjust the height before getting it aligned.

My camber is slightly negative. Probably only 1 or 2 clicks if I remember correctly. Alignment shops won't touch your adjustable camber. That you will have to set yourself. It's their policy unless it's a true tuner shop.

since i never do any align in my life when lowering my cars,i was wondering if when you adjust the height do you have to align it?if you do is it better off buying a drop springs?

Every time you change the ride height, the suspension geometry chances, so yes. You need to align. Lowering springs are non-adjustable so you only need to align once. Coilovers you can change, so you'll need more alignments if you like to chance your ride height a lot. It's a worthwhile inconvenience though imo.

you basically set it to a height you can live with, get a alignment and leave them be.

also I never had a problem with shops not touching my camber plates. It's probably because I usually go to shops that does alignment for modified and race cars.