Need help with brakes

Need help with brakes

Hi guys,

Well long story short, following thru direction I went ahead and replace my front brake pads in my 05 rolla, I replaced the pad just fine and put back everything together only deal I notice is something I did not see anywhere, there is a lugnut that holds the brake fluid cable into the cylinder, I took it off by mistake, this nub has a little hole that looks like it must match with the brake line, I makeit match I hope that's the right way. The deal is the car start bleeding, it's ok i said I just need to put back everything together and put more fluid on top... however now is not working is just not breaking.

To get this a bit more clear, I push the pedal but it just goes all the way soft, I don't fell like it's doing anything. I have the car with the e-brake and a piece of wood in the rear wheels just in case.

Help guys with ideas...,

Well... I got a pro mechanic to take a look at my car... looks like there was air in the lines and he made like 1000 adjustments. Now looks better.