HOW HARD IS IT TO INSTALL THE JDM HEADLIGHTS?? NEED TIPS...

HOW HARD IS IT TO INSTALL THE JDM HEADLIGHTS?? NEED TIPS...

HOW LONG DOES IT TAKE TO INSTALL THEM? DO I NEED ANY SPECIAL TOOLS??
THANKS.!!!

whats with the caps ...? damn

only tool you really need is a 10mm socket and a screw driver, it isn't to hard to do just follow the guide on how to clear the corners out to figure out how to get the headlights in and out. It took me about an hour the first time i took my headlights out

hey there, thanks for the tips ... did you also install your tail lights?? how hard was it?? thanks

ya tail lights are even easier cause you don't have to take apart the bumper just pop the trunk and pull the carpet away from the back of the tail lights they use a 10mm socket also

but that carpet is tacked with some sort of screw?? is that right im not sure ... so once if i pulled the carpet is it replaceable?....

ya you'll see a flat piece of plastic holding the carpet on, just pull those out they aren't really screws they just hold the carpet on and to put them back in just push them through the holes

thanks for you help again...