Engine how about nitrous installation instructions

how about nitrous installation instructions

We've been talking about nitrous this and that, but can anyone give directions on how to install it? Previous experience will help all of us who want nitrous. This will also depend on the brand. ZEX is fairly simply since it deals with throttle control. A more hands on brand like Nitrous Express and NOS will require more work.

not necessarily...here's what you'll have to do. i'm assuming you're referring to a single point nozzle instead of the multi-port deal (lots of $$).

so you get a wet system together...somethin small...50 shot. you put a hole in your intake tubing before the throttle body, and shove the nozzle in there. you'll have two lines going into that nozzle...fuel and nitrous. you'll have a solenoid that you'll have to 'splice' into your fuel line. then you'll have to run the nitrous line to your bottle which will be mounted so that it points towards the front of the car and so that the top of the bottle is above the bottom. then you run your electronics and possibly a gauge. electronics would be the ON switch and then a spray button. it is possible, as in the ZEX system, to wire the spray button so that it will only engage when the throttle is wide open. i see two problems with this....you have to be cautious about how hard you stomp your gas pedal, because you don't wanna be sprayin when you're in low gears....

anyway....there are a few sites about this, so do a lil search on a nitrous companie's website or even a google search might do it.

i'm planning on getting a NOS wet system probably by the end of july and i've asked around pretty much and just gotten to the same point that NOS particularly brings with every kit great detailed instructions...

after i get mine i can scan and post them up

Great, this really helps, thanks. Those scans will be perfect. I want to be able to install it immediately instead of waiting forever to learn or to pay to have someone else do it.

rollatuner, love you avatar