Figuring out my system setup

Figuring out my system setup

Alrite, well i've narrowed down my choices for my system. So far this is what I have.

Amp
Audiobahn A6601T

75 x 6 at 4 Ohms Stereo
105 x 6 at 2 Ohms Stereo
210 x 3 at 4 Ohms Mono
Dimensions: 2-3/8" H x 12-3/4" W x 17-1/8" D

Class A/B MOSFET Circuitry
PWM MOSFET Power Supply
Double Sided Glass Epoxy Circuit Board
THD: 0.02%
S/N Ratio: >100dB
Frequency Response: 10Hz - 40KHz (+/- 1dB)
Variable 18dB Hi-pass Crossover: 50Hz - 750Hz
Variable 18dB Low-pass Crossover: 30Hz to 120Hz
Bass boost @ 45Hz: 0/18dB
Subsonic Filter: 20Hz to 50Hz
RCA Throughput Connections
3-way Protection Circuitry: Thermal, Short Circuit and Overload; Cooling Fan
Cobalt Blue Illumination
High gloss Chrome Plated Finish
Nickel Plated Block Terminals
Audiobahn 1-Year Warranty


Subs
Audiobahn ALUM12Q (3 of them)

Main Features:
120 oz. Double Stacked Strontium Magnets
Power Handling: 1000 watts R.M.S.
Frequency Response: 18Hz ? 500Hz
Efficiency: 96.4dB
PHAT 1.75" EPDM Rubber Surround
Spun Aluminum Cone
3" 4-Layer ASV Voice Coil
Dual 6 Ohm
3 Ohm or 12 Ohm Operation
Mounting Dimensions: Depth; 5 5/8" Hole; 11 1/8" Diameter; 12 3/4"
Multi-connect Lug Lock Terminals

All I need now is to figure out what kind of components to get, and headunit. Should I go with a audiobahn component setup to keep it the same, or another brand? Also, headunit wise, 150.00 - 200.00 range. Thanks for any suggestions and also let me know if the amp and subs are good.

if ur gettin 3 of those 1000watts RMS subs, u might wanna go look into a more powerful amp, u can get distortion from not powering them enuff

do you think instead of getting a 6channel amp that I should get maybe a 4 channel amp with more power handling?

im not a car audio expert but from my understanding, subs run best off of a monoaural amp... 4 channels and stuff are good for your speakers and stuff. im sure somebody smarter then me will come up here and prove me wrong, but have u looked at the JL 1000.1 amp? kinda pricey but good as shit

I'll check that amp out. Thanks for your info.