DIY DIY: How To Install Sunvisors with Lights

DIY: How To Install Sunvisors with Lights



You want sunvisors with vanity lights to make your makeup pretty for your man? Ok.

1) Buy these:

http://trdforums.com/forum/showthread.php?t=43385

2) Then take off the 2 screws off your old sunvisors to remove them.



3) Take some wire and wire up the 2 wires in your new mirrors using the red wire to the blue/yellow in the driver's side A-pillar going up the headliner. Then the white/black wire needs to be grounded somewhere. Use these wires for both sunvisors and tuck the wires inside the edge of the headliner for a clean invisible look.





4) Screw in the new sunvisors. The tightness of the screws can be used to adjust the 'swing' of the sunvisors. Use the plastic clip to hide the screws.