1. Welcome to TRD Forums! A community for Toyota, Lexus, and Scion Enthusiasts. To enjoy all the benefits of the site, we invite you to signup.

Cambers are off with h-techs

Discussion in 'Stop, Drop & Roll' started by cmybootoo, Jul 19, 2004.

  1. Offline

    cmybootoo Guest

    Message Count:
    0
    Likes Received:
    0
    Trophy Points:
    0
    Cambers are off with h-techs

    went to the alignment shop today to get an alignment. they told me that the front camber were at 1degree and that the backs were at 1.5 degrees. Does that sound right. I do notice some premature tire wear up front but the backs seem perfectly fine. So what do i do...get a camber correction up front and leave the back or what??? :?
    cmybootoo, Jul 19, 2004
    #1
  2. Offline

    APC_MATRIX_ Guest

    Message Count:
    0
    Likes Received:
    0
    Trophy Points:
    0
    Re: Cambers are off with h-techs

    If they did a "thrust alignment", that means that you actually have -2.5 degrees of camber up front. A thrust alignment goes off of the back tires for specs so I had a reading of -0.7 degrees up front and my back is permenentely at -1.5 so that makes me at -2.3 degrees of camber up front.

    That sounds right if it's a thrust alignment, go ask to make sure though :wink:
    APC_MATRIX_, Jul 20, 2004
    #2

Share This Page