Forced Induction another 4agze rebuild

another 4agze rebuild

ok , so now its my cars turn . . .

i scorched the rings about 1 month ago , and have been waiting to finishup the twincharged and get it back to the owner. . . .now my shops freed up.

this time upon rebuild ive been throwing around some ideas . . . im gonna improve the flow on the gze. meaning , internally its gonna stay pretty much stock . the head is a small port model , ported . but the factory throttle > supercharger > intercooler > intake plumbing is gonna remain in that order . . .replacing the "dogleg" gze intake with a better flowing small port unit. replacing the pewney 50mm gze TB with A 7mgte 62mm unit. this will allow the s/c to breathe a bit better. replacing s/c intake pipe with 62mm piping instead of the 55mm oem . will be a remote mount throttle . slapping in some 240 (bigport) cams to hold the valves open a little farther for a little longer. eventually will be getting 264's to replace the 240's. finish it up with a blacktop header , and 2.25 exhaust. will be squeezing a few extra ponies out of it with a greddy emanage ultimate.


parts list.
[x] small port head
[x] big port cams (240)
[ ] acl rod and main bearings
[x] small port fuel rail
[x] 62mm 7MGTE throttle body
[ ] perfect circle ring set
[x] greddy e-emanage ultimate
[ ] adjustable cam gears
[ ] 264 cams
[x] ported , rebuilt head
[ ] nst pulley kit (15-16 psi)
[ ] water to air intercooler
[x] shimmed oil pump
[ ] 440cc injectors
[ ] adjustable fuel pressure regulator
[x] greddy sandwich plate
[ ] oil cooler
[ ] stage 3,6 puck clutch
[x] smalll port fuel rail

so far thats my list , should be good for some decent whp.



so . . . . here we go again


with brandons car back in his possesion , my shop is freed up , so now i can begin work on mine

motor mounts , exhaust and axles , then its outta there :thumbup:


ive already got my cams , sp intake , piping , and fuel rail.



other misc. "beginning" pics . . . .








oh yeah , the head before being sent to the machine shop . .

! will watch!

oh this is gonna be good

I like that home made wood round table... pretty sweet

"tool table"