yeah, the gas tank drop is required because you have to turn the bar to get it out and with the tank dropped there is barely enough space to turn the...
plan on around 3 hours max. doing it yourself from start to finish with hand tools. I don't know if you can get the stock bar out without remove a...
Thanks for the advice guys. BTW, I am not rebuilding this engine. Just simply taking it apart to learn from it then it's going to the recycler. Ok....
Ok. Got that done. How does one take the valves out? [IMG] [IMG] [IMG]
as long as Toyota don't pop a 4 banger in the Covette or make it fwd
Iff I were you, I would get an engine with a lot more mileage for a lot less if I was not going to be keeping the car. Keep in mind that even if the...
:ugh2:
What tools to take off the head? Ok. So this noob got this far: [IMG] [IMG] [IMG] [IMG] [IMG] What tool do I need to take off the bolts in...
that shouldn't happen. My TRD never rubbed with 205-45. I would check your splashguards if they are loose
I see... so the only problem was the physical size of the airbag right? The airbag does not have to be specific to the steering wheel does it?...
Hey did you reuse your airbag from the old steering wheel when you put in the new 3 spoke Toyota steering wheel or did you have to buy the new airbag...
I took my car into Cottman Transmission for a quote on transmission rebuild one time and now it shows up in my CARFAX. Super lame. I did not even...
if you use pc3200 and pc2700 together, your computer will only run at 2700 since that is the bottleneck or most resistance in the path and not see...
That happen 45min from where I live. I drive that street almost every week to visit one of my accounts. It's right off of Main St. in a mostly lower...
nah don't worry about it. i was going to tear it apart anyways.
If you are talking to me, I had over 200k on that motor. It made ticking noise and vibrations at idle. Also, the motor burnt through 1 qt. of...
hmmm...oh well. Judging from my valve cover, If I were you I would try to get a screwdriver or plier and pull back on that bent piece. It looks like...
KryticKarma, Here are pics from the old 98 engine's valve cover. PM me if you are still interested so I can get you a shipping quote. I would...
I doubt anyone presses down on a funnel hard enough to bend that piece. My guess is those Jiffy Lube quick lube places that use the gas station pump...
My old 98 1zzfe is outside in the yard rusting. It has a valve cover if you want it for cheap.
Separate names with a comma.
