I just took my 01~02 corner apart~

I just took my 01~02 corner apart~

finally got these thing apart
took me a good one hour

and now~ i can concur that the orange piece cannot be take out
anyways~ i took it apart, because i want to balck out the corner too.
i used the oem one to test, so i don't fuck up my claer corner.~

anyone got better idea, other than take it apart by dremel?

i did the oem corners no prob they were easy, i just wedged a flat head in there and it popped open, but i tried on the clear corners and that shit just cracked, so yeh i would suggest dremel at low speed....

anyways when u put the corner light back together remember to use some black epoxy resin, they have it at walmart, u awnna use black cuz if u used white you will see the lines around the corner.....heres an example of it wit black resin, u cant really see the line around the corner where i glued it back together.....



and this pic is a long time ago when i first did it white CLEAR resin, you can see the white line around the corner light...

thanks man~

i was thinking about that too~ the line for the corner light~
i used the clear silicone for my headlight..i might get some black one for corners~

I'm not sure how your corners are setup but you could try heating it up in the oven and then using a razor blade to open it...

i did try use heat gun to open it, but the matrieal it used is not the same as the one they used in head light.

I'm glad someone did it and posted. I was curious. Thanks.

after examined the clearn corner that i was gonna black out~
i decided not to do it at all.

the reason is~the quality of between clear part and housing is not as good as the oem.and it require a deeper cut compare to the oem one. it doesn't really worth the risk for now.

i so would have taken the oem corners off of you...

you mean you want to take oem blacked out corner from me or ?

if that's the case, i belive you wouldn't want it too.

one of those oem corner still have smoke paint i painted awhile back.
they don't look pretty after the paint is washed off.the lens is not clear at all