Need your advice for ampli !

Need your advice for ampli !

Hi

I just want to know if 2 Rockford Fostgate RFD2212 500w RMS is good ??

If yes, witch ampli should I put ??

Tx !!!

I'm not sure but it looks like your wanting an amp that can put out 500Wx2 so I would look at a 2 channel amp that can push that much power.

It said that the subs can only handle 250W pervoice coil lol. I'm losing myself here I don't know alot about the specs for subs or what is required by amps so I'll just take a stab at it.

I would look at a fostgate 801S amp putting out 400Wx2 @ 2 ohms. Which I think should be enough for your subs.

I am not sure on how much power your subs can actually handle though.

Re: Need your advice for ampli !

HX2s (RFD2212) are awesome subs... to power them correctly toss a Fosgate Power BD1001... or BARE minimum a BD501, but I have a BD501 running my single HX2... if I had 2 I would want the more power! Just make sure to series wire both DVC subs to 4 ohms so the amp will see 2 when you run them parallel!

running a single channel (mono) amp will yield just as good or better results for subs since they are generally more efficient. I'd go for one of the rockford fosgate amps that put out about 800-1000 watts rms mono. the power will distribute equally as long as you hook them up right.. you could also get something like a hifonics amp such as
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3060382849&category=18797
or
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3060377056&category=1498
depending on what the final impedance is going to be..

ok, tx all for the info...I will post whitch one I buy !