Engine 1ZZ power

1ZZ power

I'm goin to be rebuilding a 1ZZ and i'm woundering whats the max hp you can possibly gain from this engine?and by doing what mods.

but i also do not want to lose torque either.I know that a set of cams and possibly a bigger crank will help. I don't really want to boost it ether unless thats the only way to achive 200hp?

This has been discussed over and over again. Check the Wiseco 11:1 thread.

LoL omg so much people are lazy 2 do research -_-.

You need to work from the outside and then go into the motor. First build a cold air and if you want to be different use a four inch venturi on the front like a scoop. Get an exhaust and header. Get the pulleys wires, ground wires.etc get yourself a standalone or e-manage. Get a set of liteweight 14" slicks for the front and 15 skinnies for the back and stripweight. Did I leave something out for starters? This is a stage one buildup before getting into the motor oh yeah get a suspension too. Is rgis a street car. drag car or drift car? SCCA/ autocross?

Just in case you can't find it, here is the link for the 11:1 piston thread.
http://vvti.net/forums/showthread.php?t=12764