Problems with gauge cluster swap.

Problems with gauge cluster swap.

ok, so i bought this gauge cluster w/ tach from ebay, as everyone had said here the Odometer readings are stored in the ECU, thats wrong... atleast in my case... it just displays the ODO readings the new tach brought(wich is over 20k more than my actual readings), any idea on how to swap the readings or maybe some kind of reset so it can read it off the ECU?

Also it seems to have a small electrical problem... when i turn on my left bliker the dash turns on the rear defroster light? any ideas on how i can fix this also?

Also, someone once said i would get the outside temps w/o any problems but it just reads "-Er" or something similar on the outside temp display, any help here also?

I'd really apreciate your help guys.

thnx.

you need to swap the speedometer heads to get your mileage back. the error for the temp is because you do not have a temp sensor. dont know about your defrost/signal situation

On the 98-02 parts list that I have it shows the tach and speedo as like separate modules maybe you can exchange the speedo section only with yours. ???? CW

i was thinking about that... maybe swapping the speedo part... thnx for the advice guys
is it possible for me to get a temp sensor so i dont get that ugly -E ?

any help on the left blinker lighting up the defroster light?

i had the same problem with the error thing. so i colored a white adhesive thing black and cut it to the sahpe of the display and covered it up. looks much better.

guys, i just changed the ODO part of both cluster and it swaped the ODO readings, YAY!

now i just have tu fix the turn light problem, any ideas? Has anyone swaped their clusters in 98-02s maybe its just one of the wires? does anyone hace a pinout chart of the 4 plugs that attach to the clusteR?

^bump^ hasn't anyone changed their gauge cluster and has this left blinker / rear defroster problem?

or doesnt anyone have a pin mapping of the 98-02 gauge cluster?