1. Welcome to TRD Forums! A community for Toyota, Lexus, and Scion Enthusiasts. To enjoy all the benefits of the site, we invite you to signup.

screw doing suspension!

Discussion in 'Stop, Drop & Roll' started by xnevergiveinx, 2004年10月28日.

  1. Offline

    xnevergiveinx New Member

    Message Count:
    515
    ライク受信:
    0
    賞:
    0
    Location:
    north royalton, oh
    screw doing suspension!

    oh man, i ordered my dropzone struts and coilovers on ebay and they came yesterday. today i set aside a couple of hours to do the front suspension.

    oh, well, i should have set aside a full day for the front suspension. those two stupid bolts on the bottom of the strut took forever to get off. i went out and bought a 6point 19mm socket because i had a 12point and i didn't want the chance of rounding off the nut. so, after alot of sweat and yelling, i finally got the driver's side done. only to find out that my springs we sagging so bad that when i put the coil overs almost all the way dropped (about an inch is left on the sleeves to drop), it looks the same height as the other side of the car, which isn't all that impressive, it's still like 2 inches in between the fender and the top of the tire. whatever, it's a hell of a lot better when a press on that side of the car compared to the stock side.

    so, i attempted the other side. oh yeah, that's not going to work. i busted 3 craftsman 3/8" socket wrenches and a 3/8" to 1/2" extender. i tried vice grips and all my might to get those bolts loose. but they aren't coming loose. so, i gave up.
    i brought the broken tools to sears and they replaced them. then i bought a 145 pc mechanics tool kit, reason being, have of my tools are missing and all the sockets are 12points and i don't have half of them.and most of my tools are some wierd japanese brand. it was on sale for $150, so you can't pass it up.
    it's got all the goodies. regular and metric deep and normal size sockets in 1/4, 3/8 and 1/2" drive. and a bunch of wrenches.
    only thing i don't like about the set is that all the sockets are 6points and i need a 19mm wrench, but they only include up to 18mm.

    so, i guess i can finish the front end. i sprayed down the bolts with alot of PB blaster, so that should help loosen them up. i'll go out and buy a 19mm wrench tomorrow, craftsman wants like $11 for it, but i guess it'll be worth it.

    i do not want to do the back suspension, main reason is because of the annoying design of the swaybar end links. i do not want to have that allen key round out and have to figure out a way to remove the end link. i have read vamps diy and it didn't look like fun. so, should i have a shop like conrad's do it for me? how much do you think it would cost for them to put my rear suspension on?
    xnevergiveinx, 2004年10月28日
    #1
  2. Offline

    laz Member

    Message Count:
    634
    ライク受信:
    0
    賞:
    16
    Location:
    NYC
    hehehe, I feel your pain! I just did mine recently, and I got one thing to tell you: 3 Foot Steel Pipe from home depot! lol Actually even with that pipe it still took me the whole day to do the whole suspension on mine. I actually went from dropped to stock. Another thing, don't use ratches to break the nuts loose, get a set of wrenches, and I guarantee you that with the combination of wrench and pipe then you will break those nuts like butter!

    The back is not hard. Just get a screwdriver with an allen point that fits. You do not have to use the allen bolt to break anything loose, just to hold it once it is loose, so the pressure is minimun. Once again use wrenches to break all the nuts loose, and you'll feel way better! I know my bar made it a zip to break them loose, but it is indeed a hard job. One other thing for the back make sure you get a couple of stands and lift up the whole back. This makes it easier on the rear stabalizer bar off/on since there is no pressure on it fighting you.

    GL

    X
    laz, 2004年10月28日
    #2
  3. Offline

    JspeXAE102 Well-Known Member

    Message Count:
    4,851
    ライク受信:
    15
    賞:
    588
    Location:
    群馬 日本
    use a breaker bar for those bolts. save your wrenches
    JspeXAE102, 2004年10月28日
    #3
  4. Offline

    94rolladx Guest

    Message Count:
    0
    ライク受信:
    0
    賞:
    0
    yeah man it was tough i did my suspension the other day...took all day but i got it done and i love it...good luck man
    94rolladx, 2004年10月28日
    #4
  5. Offline

    triune530 Guest

    Message Count:
    0
    ライク受信:
    0
    賞:
    0
    When I did my '93 DX it took me almost 2wks. & I really did take my time doing it. I installed new shocks, springs, & strut bar. I ended up buying a spring compressor from Autozone=$40 & some socket Craftsman wrenches I really saved up for the expenses on this job. Before putting those bolts back "put some all purpose grease on the threads" to avoid rusting or when removing them again it wouldn't be so hard.
    I was driving the wife's 4RNR during the process.
    triune530, 2004年10月29日
    #5
  6. Offline

    CivicEater Guest

    Message Count:
    0
    ライク受信:
    0
    賞:
    0
    suspension on the corolla is almost the easiest job i've ever done.. only the scion beats it..
    CivicEater, 2004年10月29日
    #6
  7. Offline

    e_andree E

    Moderator
    Message Count:
    8,246
    ライク受信:
    13
    賞:
    578
    Location:
    MD
    If you have the right tools, its a 2 hour job.
    e_andree, 2004年10月29日
    #7
  8. Offline

    HispinyolaInTheCorolla Guest

    Message Count:
    0
    ライク受信:
    0
    賞:
    0
    Bruised/Bloodied knuckles and broken wrenches lead to breaker bar and Liquid Wrench;)
    HispinyolaInTheCorolla, 2004年10月29日
    #8
  9. Offline

    laz Member

    Message Count:
    634
    ライク受信:
    0
    賞:
    16
    Location:
    NYC
    hehehehe, a fat tough breaker bar is indeed a good friend! but a wrench is definitely better than a ratchet, but breaker bar is better than all! I still need to get one, but man, the pipe is a must! :) And believe me when you do it by yourself in a dark garage, it is definitely hell and more than two hours! I think it took me like 4 to 5 to do mine by myself, and a lot of that time was compressing the stock springs to get them back on!
    laz, 2004年10月29日
    #9
  10. Offline

    vortex Well-Known Member

    Administrator
    Message Count:
    4,110
    ライク受信:
    48
    賞:
    748
    Location:
    Westminster, CO
    Total time on my 98 Corolla to do all four springs and strut/shocks:




    ... 1 hour 45 minutes ...


    as dre said - the right tools help. :)


    as others have said - shoulda gotten a breaker bar with that 6 point. A nice longer breaker bar always is nice too. (more leverage)
    vortex, 2004年10月29日
    #10
  11. Offline

    JspeXAE102 Well-Known Member

    Message Count:
    4,851
    ライク受信:
    15
    賞:
    588
    Location:
    群馬 日本
    air tools are the answer
    JspeXAE102, 2004年10月29日
    #11
  12. Offline

    xnevergiveinx New Member

    Message Count:
    515
    ライク受信:
    0
    賞:
    0
    Location:
    north royalton, oh
    ok, i did the passenger side strut and spring, me, being a dumbass was tightening the nut instead of loosening it, so thats why i couldn't get it undone. it still took a half hour of pounding with a wrench and sledgehammer. i still couldn't get it loose, so i took and set up a stack of bricks and dropped the car down, with the wrench against the stack of bricks, risky, but it finally got it loose, getting everything back on was a breeze and my ride is so nice now! i'll attempt the back suspension soon, we'll see
    xnevergiveinx, 2004年10月30日
    #12
  13. Offline

    e_andree E

    Moderator
    Message Count:
    8,246
    ライク受信:
    13
    賞:
    578
    Location:
    MD

    Get someone to do the back for you....unless you think you can slot the brake line bracket, or rebleed your brakes.
    e_andree, 2004年10月30日
    #13
  14. Offline

    Corolla DX-R AE100

    Message Count:
    1,570
    ライク受信:
    0
    賞:
    0
    Location:
    Vancouver, B.C.
    a powerful impact should take any bolts in no time..
    Corolla DX-R, 2004年10月30日
    #14
  15. Offline

    Wheee Guest

    Message Count:
    0
    ライク受信:
    0
    賞:
    0
    Electric impact

    Hey all, I just did some suspension work today, installed cam bolts on my front struts and camber spacers on my rear wheels (I'll be posting a new thread with the info). I also rotated my tires. What my brother has, that I always use for my wheel lug nuts, and which worked beautifully for the strut bolts, is an electric impact wrench (Chicago Electric brand) that he got from harborfreight.com. It's extremely portable, you don't need an air compressor, and it makes enought torque (240 ft/lbs. I think) to easily loosen anything suspension related or whatever. It's about $80. I also have a cheapie 1/2" 150 ft/lb torque wrench from harborfreight that cost about $20 and works very well. Get what you need in advance, and you won't be cursing.
    Wheee, 2004年11月02日
    #15
  16. Offline

    vash Guest

    Message Count:
    0
    ライク受信:
    0
    賞:
    0
    two words.....air tools
    vash, 2004年11月08日
    #16
  17. Offline

    asn13oy Stepping Stones

    Message Count:
    683
    ライク受信:
    0
    賞:
    18
    Location:
    OC, CA
    plus two more words...air compressor
    asn13oy, 2004年11月14日
    #17
  18. Offline

    asn13oy Stepping Stones

    Message Count:
    683
    ライク受信:
    0
    賞:
    18
    Location:
    OC, CA
    and another two words...air tank
    asn13oy, 2004年11月14日
    #18
  19. Offline

    asn13oy Stepping Stones

    Message Count:
    683
    ライク受信:
    0
    賞:
    18
    Location:
    OC, CA
    oh...can't forget the hose....oh yeah! and the couplings....hmmm...what else?
    asn13oy, 2004年11月14日
    #19
  20. Offline

    rolla02 Corollalcholic

    Message Count:
    2,622
    ライク受信:
    0
    賞:
    38
    Location:
    Delaware
    AIR TOOLS AND ACCESSIORIES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Took me and my buddy only 30 mins to pull it off and another 30 mins to put it back on.
    rolla02, 2004年11月14日
    #20
  21. Offline

    asn13oy Stepping Stones

    Message Count:
    683
    ライク受信:
    0
    賞:
    18
    Location:
    OC, CA
    Lol...funny guy...
    asn13oy, 2004年11月14日
    #21
  22. Offline

    SkyAce2004 New Member

    Message Count:
    885
    ライク受信:
    0
    賞:
    0
    god, ive had my suspension droped for almost 2 yrs now, i had a friend help me out, took about 2 hrs to do, best part was when he droped the strut in a laundry basket full of rags, took the air wrench, let the bolt off and the thing exploded in there, lol. funny to watch 4 times in a row.
    SkyAce2004, 2004年11月14日
    #22
  23. Offline

    rolla02 Corollalcholic

    Message Count:
    2,622
    ライク受信:
    0
    賞:
    38
    Location:
    Delaware

    Its 2 am here and I have been up for the last 20 hrs. I am little weird when I am tired
    rolla02, 2004年11月14日
    #23
  24. Offline

    cleanrolla97dx Guest

    Message Count:
    0
    ライク受信:
    0
    賞:
    0
    the hardest part on ther rear for the 93-97 is getting to the top strut bolts you have to pull the rear seat peices off
    that and rolling the fenders mine are chipping paint now super huh
    cleanrolla97dx, 2004年11月15日
    #24
  25. Offline

    NCTII87 Guest

    Message Count:
    0
    ライク受信:
    0
    賞:
    0
    i've done like 4 93-97's. its like an hour job now. the hardest part is the rear brake line
    .
    NCTII87, 2004年11月18日
    #25

TRDの愛を広める