coilover?

I'll post the pics of the koni's on my car when I get my camera back from my friend... probably this weekend

x2

OMG im in love with Koni now. i just found out their north american service center is 95 miles from my apartment and found this little tidbit on their site:

KONI wet kit conversion

KONI can fabricate anything you may need. We can take your existing strut housings and install our internals; we refer to this as a wet kit. We can make a wet kit single adjustable or double adjustable depending on your budget. We can convert the strut body to utilise a coil-over sleeve or we can modify the housing to meet specific needs. KONI can also fabricate shocks or strut inserts. Let us know your needs and we can give you a cost.

That would actually be a great idea. The hardware with ksports is pretty good, just the dampers are the real issue. Their dampening is all uber the place. Not very well matched to each other shock, much less to the spring rates. But if you know the spring rates, Koni can rebuiild and revalve the dampers to have matching adjustment ranges and matched to the spring rates. Most of the tine Koni will valve the shock to run a bit stiffer spring than you are using, so if you ever decide you need a higher spring rate you dont have to ship the shocks off again to have them re done again.. kind nice if you ask me.

Nice!

What year it it again?

I used oem with coilover not too bad little bit stiff it didnt bother me at all but hate being speedbump, my son hear sqeak very little front strut not rear.

x2