Yay
Intake still available?
I've got one for sale
I've got a pair for sale
My buddy gave me some Si wheels for free. They were pretty banged up and needed some work. I decided to polish them... After stripping and wet...
Still parting out the Silver S. Let me know if you guys need anything. [IMG] [IMG] Your Lexus? If so, that sucks bro. Sorry to hear that.
I swapped the alternators and the battery light has gone away. Thanks Mack.
Thanks bruhh
Here are the foglights I bought on Amazon. They are made by DEPO, same people that make my headlights. Very good quality stuff. I'm am really pleased...
Nice work on the front end, get some fogs next.
Where is this going to be at? QSL?
I hear ya
That's strange. The 14 millimeter (1" O.D.) washer is the perfect size for pressing against the bearing that allows rotation. That 1.5" O.D. might be...
99Rolla, what are your rim/tire specs in the pic above?
SOLD
I swapped intake manifolds and throttle cable. After the swap was done I realized one of the two bolts that holds the throttle body on was missing....
Yes 2 washers ON EACH SIDE. 5/8" inside diameter and 1" outside diameter. A regular 5/8" standard washer outside diameter will be alot larger than a...
No problem. The washer on top is the size I used. 2 washers per strut. Front left / front right. I also remember needing a spacer for the top mount...
Put them exactly where they are in this pic. When you put your top mount on the piston it will stop as a certain point. Where it stopped, take the...
Yea my perch is smooth too. I took everything off again tonight and used 2 of the same 5/8" inside and 1" outside washers instead of a larger...
独立した項目と、
