altis grill install

altis grill install

just got my altis grill, and i'm not sure that i'm attatching the mesh right. i took some pics, can someone that has done it let me know if its right or not?




should i trim all of that mesh that is hanging off the bottom corners or what? and should my mesh be curved along with the grill, or should it be flat behind it?

i cut all mine off, you'll have to make sure u cut enough so that the tabs still go in, i also had to move the middle connecting brace on the car a little to the right to get it to line up but no biggie. jsut cut off the wire.

it should curve like that, though?

try installing the grill and u will see what and how much you need to cut ...

you will have to cut it all the way around..otherwise it will not fit coz of the tabs and everything.

you have to screw it into the holes then cut it, it might have to curve with teh grill, i forget. but screw it in with plenty of grill on each side left, then cut

Re: altis grill install

no... that's wrong... turn your mesh 180 degree around...

also it shouldn't curved like that.. and yes.. cut the rest of the mesh off after you instell it correctly..

i'll try to take a closer picture of my grill to show you today...